1/8″ (3.2mm) Flooring Overlay System / Chemically Resistant Slurry Resurfacer

  • Outstanding chemical resistance
  • 100% solids
  • Excellent impact resistance
  • Low temperature cure (40° F or 4.4° C)
  • Excellent wear resistance
  • Fast walk-on time

Armorgard 601SF is a 100% solids, chemically resistant, no odor, slurry and broadcast epoxy flooring system. Armorgard 601SF was designed to provide outstanding protection, for new or old damaged concrete, against a wide range of chemicals, specifically organic acids, solvents, and mineral acids found in food processing and chemical plants. Armorgard 601SF is USDA approved for application to structural surfaces or surfaces that will receive incidental food contact. Adhesion to wood, concrete and most metals is excellent.

Armorgard 601SF was designed to protect floors from moderate industrial traffic (specifically, steel-wheeled carts and forklift trucks) making it ideally suited for chemical processing, food and beverage plants, power plants, pulp and paper mills, utilities and anywhere a clean, tough floor is needed.

Application thickness can be varied from 1/16″ to 1/8″ (1.6-3.2 mm) topping.